What's new in today's release of Lapin 11.11.2026

Drafting and dimensions

  • Dimensions are easier to draw.
    • A Continuous checkbox in the tool bar chooses between a single dimension and a dimension string. Single is the default, for aligned and linear dimensions alike, and the choice is remembered.
    • Single dimensions can be placed one after another without restarting the tool.
    • A string ends with a right-click, Enter, clicking its last point again, a double-click, or the Finish string button.
    • Esc, or picking another tool, keeps the string drawn so far and tells you so.
    • A linear dimension no longer flips between horizontal and vertical while you draw. Tab switches it.
    • Each segment’s value is shown while you draw.
  • Dragging a dimension’s middle grip moves its dimension line instead of splitting it in two. Ctrl/⌘-drag adds a point.
  • A dimension held on a grid axis or a wall’s centre line stays where it measured when that line is stretched.
  • Tags can be turned by an angle or aligned to their element, and stay readable. They have a turning grip in 15° steps. The tagged element is highlighted while you hover or select its tag.
  • EXPLODE (X) splits polylines and rectangles into lines.
  • Fixed: images and PDF pages to trace were drawn upside down.
  • Fixed: a solid hatch could not be selected.
  • Spot coordinates (DIMCOORD) show Easting and Northing, worked out on every drawing.

Location and georeferencing

  • A georeferenced project’s plans export to DXF in the plan’s, the base point’s or the map’s coordinates (Stereo 70 in metres, turned to true north).
  • A plan can be turned true north up on screen.
  • The internal origin, base point and survey point are shown in plans and 3D, with their coordinates and true north.
  • Lambert-93 (EPSG:2154) is supported.
  • Fixed: survey points from a DXF could not be read.

Modelling

  • Pin / Unpin (Modify menu, or the Pinned box in Properties): a pinned element can’t be moved, turned, mirrored, raised, sent to another storey or deleted until it is unpinned. Its other properties can still change.
  • Modify → Array, in a row or around a centre, for any element. Studio’s Array, Polar array and Move 3D now work on non-solids too.
  • References (imported geometry) can be moved, turned, mirrored, copied, raised and arrayed like any element. Links stay read-only.
  • Apartment types:
    • a flat made once and placed many times, turned or mirrored;
    • an edit to one placement carries only what changed;
    • inner walls stop at the building’s walls;
    • the flat’s doors and windows go into the building’s walls wherever it is placed.
  • Hotlinks are mirrored when linked and when placed again.

Doors, windows and curtain walls

  • Frameless glass doors and windows:
    • pivot doors with patch fittings or glass hinges;
    • swinging or sliding leaves;
    • fixed panes in channels.
  • Door and window data as free text, and the frame’s position in the wall as a value, in schedules, tags and IFC.
  • A sloped exterior sill now cuts the wedge above it out of the wall, in 3D, sections and quantities.
  • A room’s doors and windows can be chosen in its properties, by type and side.
  • Curtain walls:
    • their outline can be drawn in elevation (Profile dialog), and the grid, panels and members follow it;
    • chosen mullions and transoms take their own profile, with turn, mirror, alignment and offset;
    • a section editor draws or edits a profile in millimetres.

Structure, steel and furniture

  • A strip footing is the concrete alone by default; the wall on it is an option of the tool.
  • What you draw in a foundation plan goes on the level below it. An element’s offset from its level and its absolute elevation can be edited in Properties.
  • Footings and piles below a plan’s range are drawn dashed in their storey’s plan.
  • Steel quantities follow the profile’s real cross-section area (for example, IPE 300 at 53.81 cm²). This applies to quantities, takeoffs, member lists, hall weights, estimates and durations.
  • A steel hall’s bays are in the project’s unit, with a Length field.
  • Kitchen layouts: galley, L-shaped, U-shaped, island and peninsula, besides the straight run.

Interface

  • Preferences dialog:
    • the theme;
    • a fixed or adaptive grid;
    • object snaps by type;
    • the polar step;
    • cursor coordinates;
    • a user coordinate system (UCS).
  • View tabs can be dragged out to their own windows or into split panes.
  • Fit to view frames the model and leaves far-off stray objects out.
  • The project browser and Properties can sit on either side or be stacked (View → Panels).
  • Measuring in 3D gives the true length in space between points at different heights.

Performance

  • Undo and redo are faster.
  • Very large models use less memory.
  • Fewer repeated calculations when walls are cut by other elements.
  • Saving no longer pauses the app while it writes its recovery data.

It will be about an hour until everything will propagate to the current verion.