Opening in walls, beams

The idea:

Let the opening as simple void or made by door, window element to be defined only partially in element profile. The opening moved out of its host body after loosing focus should be removed.

How it would help my work:

It will let me properly define door which starts in reinforced concrete wall and goes through upper masonry part.

How I do it today: (in Lapin or another program)

I define the door/window in the wall which I choose and manually add void to element which is not the host.

This is an automated reply, approved by Ionut. Done for the next update:

  • A door, window or opening now also cuts the walls running along its host where it reaches into them: a masonry wall stacked on a concrete one, the wall under it, or a lining against its face. It cuts each of them through its whole thickness.
  • Your door starting in the RC wall and going up through the masonry needs no manual void anymore. The masonry gets the lintel.
  • Moving the opening (or the walls) updates which walls are cut, and a wall it no longer reaches is whole again.
  • In IFC, each wall cut gets its own IfcOpeningElement, with the same ids at every export.
  • The option “Cut also the walls it passes through” is on by default and can be turned off per opening.