These are yesterday’s changes, published last night in the web version (Lapin). The desktop apps are on 0.1.1022 and get them with the next desktop release.
New
- Finish painter (Interior → Finish painter): paint finishes on the faces of walls, floors and columns in 3D. Split a face into regions, pick a finish with the eyedropper or clear it. Finishes are built layer by layer from the face outward, cut around openings, mitred at outer corners, measured, and listed in schedules.
- Exterior dimensions (Annotate → Exterior dimensions, ED / EXTDIM): dimension strings placed outside each facade, found from the plan’s cut. Choose their order (details, opening centres, grid axes, rooms, overall), offset, spacing and style in the Dimension rules… dialog.
- Room separation lines: drawn as a line, polyline, rectangle, arc or circle. They bound rooms the way walls do. Rooms on either side meet exactly on the line, and their areas add up to the whole room. Kept through IFC export and import.
- Crop region and annotation crop for plans, sections and elevations.
- Hide in view, temporary hide/isolate and Reveal hidden in plans and sections.
- Quick select by class, type, storey, material or property, in the view or the whole project. The right-click menu also gains Select similar, Select all with the same…, Edit type and Previous selection.
- Beam-and-block floors: precast joists at a set spacing, infill blocks and a cast topping, laid out from the floor’s outline and openings.
- Structure types imported from CSV or XLSX, and beam types used as precast lintels.
- MEP: cable trays, ladders, trunking and conduit.
- Vacuum lift: a circular tube on a base ring, with no shaft or pit, and round openings cut in the floors it passes through.
- Materials: normal and bump maps, see-through glass from IFC, and a separate material for each part of doors and windows in IFC. Studio solids and their types can take a material. A material can be kept out of joins.
- Types: duplicate any type, and reorder types in their lists.
- Grids: renumber axes in order, with numbers or letters, a starting value and a prefix. Dimensions follow renamed axes.
- Rooms: colours with opacity, on screen, in SVG and in PDF.
- Parameters inspector lists every field that tags and formulas can read on an element, with its current value.
- View tabs: Ctrl+Tab / Ctrl+Shift+Tab (or Ctrl+Page Down/Up) switch between them. A 3D tab keeps its camera and section box while another view is in front.
- Panel sides can be chosen in View → Interface….
Better
- Openings cut every wall they pass through, and cut them faster.
- Dimensions:
- Ctrl-click an end grip to continue a chain, or Alt-click a point to remove it.
- Split, join and align dimensions from the right-click menu.
- Suppress trailing zeros for the whole project or per dimension style.
- Level marks have their own decimals.
- Large SDNF files import quickly. Each stage is shown with a Cancel button, every failure is reported with its line, and a report is shown at the end.
- Room area, perimeter and volume are measured to the finishes.
- Web: the first load is 14.5 MB again. To stay under that budget, some modules (planning, cost, rebar, timber, steel, MEP and a few others) now run interpreted in the browser, so their geometry may be a little slower there. Desktop is unchanged.
- Status bar: now a single line. Notices show above dialogs, and the 3D command line sits at the bottom of the view.
Fixed
- The floating 3D command line no longer blocks clicks on the cards beneath it, such as the analysis panel’s Rerun.
- After a walk, the 3D view returns to the camera you had before.
- Openings can be selected in sections and elevations, and with a selection box in plan.
- A spiral stair’s railing follows its treads all the way.
- In German, a button in the Furniture types dialog no longer runs past its column.
Thanks to everyone who reported these on the forum. Keep them coming!