# Wal, floor, etc. layers editing in section

**URL:** <https://forum.lapinbim.com/t/wal-floor-etc-layers-editing-in-section/89>\
**Category:** General\
**Created:** [November 14, 2026, 9:52am UTC](https://forum.lapinbim.com/t/wal-floor-etc-layers-editing-in-section/89 "2026-11-14T09:52:17Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![benlungu](https://forum.lapinbim.com/user_avatar/forum.lapinbim.com/benlungu/32/49_2.png) [@benlungu](https://forum.lapinbim.com/u/benlungu)\
**Post date:** [November 14, 2026, 9:52am UTC](https://forum.lapinbim.com/t/wal-floor-etc-layers-editing-in-section/89/1 "2026-11-14T09:52:17Z")

</div>

It will be a very good addition if we can unlock the layers of an assembly (wall, slab, roof etc.) and edit the layers in section or plan. For example if i have a slab modeled until the edge of a foundation or regular wall, but i want to extend the finish with 2cm over the edge of the wall, unlocking the layers will allow for that. When extending a layer we should also be able to define that will cut the other element or no if it intersects with other objects. In revit we accomplish this by modeling two floors and sometimes also the wall is split in 3 or 2 separate walls, but having the possibility to do this directly on the wall or floor layers is much better workflow.

 ![image](https://forum.lapinbim.com/uploads/default/original/1X/44f91d1ce1b6c1acbd7acad92471624c36bcb9b9.png)

---

<div class="post-metadata">

**Author:** ![Rychlas](https://forum.lapinbim.com/letter_avatar_proxy/v4/letter/r/977dab/32.png) [@Rychlas](https://forum.lapinbim.com/u/Rychlas)\
**Post date:** [November 14, 2026, 1:37pm UTC](https://forum.lapinbim.com/t/wal-floor-etc-layers-editing-in-section/89/2 "2026-11-14T13:37:44Z")

</div>

Something like this?

 ![image](https://forum.lapinbim.com/uploads/default/original/1X/69bfd887adba05feabe694f6a085be3e3ccc644f.png)

Or did you mean this:

 ![image](https://forum.lapinbim.com/uploads/default/original/1X/11e7e105696166d452eb157874f2f259fd2674b6.png)

 ![image](https://forum.lapinbim.com/uploads/default/original/1X/a5f0e8dadd559979b2f17cb2da3158a5abb2f02c.png)

The first one is just an offset wall with properly set up priorities in the wall type and floor type, the second one was made with a wall sweep.

 ![image](https://forum.lapinbim.com/uploads/default/original/1X/4de28a73127774b7105a5441d828b489bb7cd9fd.png)  
 ![image](https://forum.lapinbim.com/uploads/default/original/1X/e979d80e1a4f9fa1a503015620d71104b31d2103.png)

PS.  
The ability to edit as suggested would be nice, though. I just posted a workaround available right now.

---

<div class="post-metadata">

**Author:** ![claude](https://forum.lapinbim.com/letter_avatar_proxy/v4/letter/c/0ea827/32.png) [@claude](https://forum.lapinbim.com/u/claude)\
**Post date:** [November 14, 2026, 4:07pm UTC](https://forum.lapinbim.com/t/wal-floor-etc-layers-editing-in-section/89/3 "2026-11-14T16:07:08Z")

</div>

This is an automated reply, approved by Ionut. Thanks for the idea, and thanks Rychlas for the workaround. The first stage of layer extents is in the next update. Select a wall or a floor and open **Layer extents** in its properties. Each row is one layer at one edge: a wall’s start, end, bottom or top, or a floor’s whole outline or a single edge of it. Give a distance past the edge (positive) or short of it (negative). For example, the floor finish can run 20 mm over the wall it was drawn to, without splitting anything. Tick **Cuts others** to take that piece out of the walls and floors it runs into; leave it off and they overlap, each keeping its own quantity. Plans, sections, 3D, quantities and IFC all follow, and the element keeps its type’s layer set. Next, already in progress: grips to drag the layer edges directly in sections and plans, curved walls, type defaults, and cutting columns and beams.

---

<div class="post-metadata">

**Author:** ![claude](https://forum.lapinbim.com/letter_avatar_proxy/v4/letter/c/0ea827/32.png) [@claude](https://forum.lapinbim.com/u/claude)\
**Post date:** [November 14, 2026, 4:56pm UTC](https://forum.lapinbim.com/t/wal-floor-etc-layers-editing-in-section/89/4 "2026-11-14T16:56:23Z")

</div>

This is an automated reply, approved by Ionut. Layer extents, part 2, in the next update: select a wall or floor and choose **Edit layers** (Architecture tab, or the button under Properties → Layer extents). Each layer shows its outline and a grip on every edge, in plans and in sections; drag a grip, or type a distance while dragging. Each drag is one undo step. Curved walls now take extents too, and under a roof a layer’s top extent moves it along the roof line, below it or into it. Wall and floor types can carry default extents; an element’s own setting wins. A layer reaching past an edge can now also cut columns, beams and footings, and besides Overlaps and Cuts others there is **By cut order** : it cuts only what its element outranks in Manage → Cut order, so a floor finish cuts the wall while a wall’s plaster leaves the floor whole.
