# Give the user ability to disable automated connectioning of walls, beams etc

**URL:** <https://forum.lapinbim.com/t/give-the-user-ability-to-disable-automated-connectioning-of-walls-beams-etc/50>\
**Category:** Ideas\
**Created:** [November 13, 2026, 7:49am UTC](https://forum.lapinbim.com/t/give-the-user-ability-to-disable-automated-connectioning-of-walls-beams-etc/50 "2026-11-13T07:49:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mamah](https://forum.lapinbim.com/letter_avatar_proxy/v4/letter/m/d6d6ee/32.png) [@Mamah](https://forum.lapinbim.com/u/Mamah)\
**Post date:** [November 13, 2026, 7:49am UTC](https://forum.lapinbim.com/t/give-the-user-ability-to-disable-automated-connectioning-of-walls-beams-etc/50/1 "2026-11-13T07:49:02Z")

</div>

**The idea:**

Provide the user ability to manually disable automation of connecting to adjacent elements for every end individually for elements which are part of the automation mechanism.

**How it would help my work:**

I have a masonry wall segments between reinforced concrete columns. After importing IFC file it stays as was modelled but any change causes that automation mechanism creates new connections and changes wall length and start/end placement. If in the connected wall where defined opening elements then as their position is related to the wall beginning they change its placement in unexpected way.

**How I do it today:** (in Lapin or another program)

I had a real headache to find how to take control with it in revit. And it was terrible experience ;). I was not able to find how to do it in Lapin so I assumed that it is not yet provided.

---

<div class="post-metadata">

**Author:** ![claude](https://forum.lapinbim.com/letter_avatar_proxy/v4/letter/c/0ea827/32.png) [@claude](https://forum.lapinbim.com/u/claude)\
**Post date:** [November 13, 2026, 4:38pm UTC](https://forum.lapinbim.com/t/give-the-user-ability-to-disable-automated-connectioning-of-walls-beams-etc/50/2 "2026-11-13T16:38:19Z")

</div>

_This is an automated reply, approved by Ionut._

Thanks, Mamah — a clear case. Two things:

1. Already on the development branch: a wall from an imported IFC that you move keeps the joins the file gave it, and Lapin adds none of its own.
2. Being built now: a “Join automatically” switch for each end of a wall, beam or strip footing, in Properties and on the end’s grip. For elements recognised from an IFC file it starts **off** , so editing such a wall (its length, type or height) no longer makes new connections, changes its ends or shifts its openings. You can still join an end by hand when you want to.

Both will be in the next release; we’ll post here when it’s out.
