# Feature request: Allow different window and door sizes within one parametric type

**URL:** <https://forum.lapinbim.com/t/feature-request-allow-different-window-and-door-sizes-within-one-parametric-type/140>\
**Category:** General\
**Created:** [November 17, 2026, 4:24pm UTC](https://forum.lapinbim.com/t/feature-request-allow-different-window-and-door-sizes-within-one-parametric-type/140 "2026-11-17T16:24:56Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Petri](https://forum.lapinbim.com/user_avatar/forum.lapinbim.com/petri/32/52_2.png) [@Petri](https://forum.lapinbim.com/u/Petri)\
**Post date:** [November 17, 2026, 4:24pm UTC](https://forum.lapinbim.com/t/feature-request-allow-different-window-and-door-sizes-within-one-parametric-type/140/1 "2026-11-17T16:24:56Z")

</div>

**Feature request: Allow different window and door sizes within one parametric type**

Currently, Lapin’s window and door TYPE components require a separate type for every width and height combination. This creates many nearly identical types and makes the library difficult to maintain.

For example, a common Finnish window construction is called **MSE**. I would like to define its construction and shared parameters once, then place MSE windows of any required width and height without creating a new TYPE for each size.

**Proposed behaviour:**

- Define the construction, frame profiles, materials and other shared properties in one reusable parametric type.

- Allow width and height to be set individually for each placed window or door.

- Update the geometry automatically when these dimensions change.

- Keep all instances linked to their shared type, while preserving their individual dimensions.

For example, MSE windows measuring **1,200 × 1,200 mm** , **900 × 1,500 mm** and **1,800 × 1,200 mm** should all use the same MSE type.

The same principle should apply to doors: **size should be an instance parameter, without requiring a separate type for every dimension combination.**

---

<div class="post-metadata">

**Author:** ![Rychlas](https://forum.lapinbim.com/letter_avatar_proxy/v4/letter/r/977dab/32.png) [@Rychlas](https://forum.lapinbim.com/u/Rychlas)\
**Post date:** [November 17, 2026, 4:35pm UTC](https://forum.lapinbim.com/t/feature-request-allow-different-window-and-door-sizes-within-one-parametric-type/140/2 "2026-11-17T16:35:40Z")

</div>

I agree and like the idea. Perhaps we could get nested “Subtypes” for types, where we can pre-specify variants of the types? For sure would be extremely useful and make the project less cluttered.

---

<div class="post-metadata">

**Author:** ![Ionut](https://forum.lapinbim.com/letter_avatar_proxy/v4/letter/i/da6949/32.png) [@Ionut](https://forum.lapinbim.com/u/Ionut)\
**Post date:** [November 17, 2026, 7:35pm UTC](https://forum.lapinbim.com/t/feature-request-allow-different-window-and-door-sizes-within-one-parametric-type/140/3 "2026-11-17T19:35:14Z")

</div>

This one will be available in the next release. It is in the works.

---

<div class="post-metadata">

**Author:** ![Goe](https://forum.lapinbim.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Goe](https://forum.lapinbim.com/u/Goe)\
**Post date:** [November 17, 2026, 8:55pm UTC](https://forum.lapinbim.com/t/feature-request-allow-different-window-and-door-sizes-within-one-parametric-type/140/4 "2026-11-17T20:55:12Z")

</div>

Hello, good idea.

While in the library, a window type could be defined only by the frame type, the glass type, the opening type, in the joinery schedule, they will be listed as different windows if they have diffrent dimentions, even though they have the same materials and type of opening.
